Pump manufacturer · Ahmedabad, India · Since 1991
Bhagyoday Pumps (BPPL) designs and manufactures UDAY plunger pumps, metering pumps and hydraulic test pumps for chemical, water, power and testing applications. Each pump is matched to your liquid, flow and pressure.
What we make
Not sure which one you need? The table further down compares them, or ask our engineers.
High pressure
Also called: high-pressure reciprocating pumps, triplex / quintuplex pumps.
Deliver a steady, high pressure for continuous industrial duty.
Used for: chemical injection, RO feed, boiler feed, hydro-jetting, cement grouting, hydrostatic testing.
Up to 700 kg/cm² (686 bar · 9,956 psi) · up to 1,907 l/min (114 m³/h)
Accurate dosing
Also called: dosing pumps, chemical injection pumps, diaphragm metering pumps.
Add an exact, adjustable amount of chemical to your process, accurate to ±1%.
Used for: water treatment, boiler and cooling-water chemicals, process dosing, toxic or hazardous liquids.
0.76 to 15,000 l/h (15 m³/h) · flow adjustable 0–100% while running
Multi-point dosing
Also called: multi-head dosing pump.
Three dosing heads on a single motor, each set to its own flow, for dosing several chemicals or points at once.
Used for: corrosive chemicals, viscous liquids, oils, slurries, cryogenic and high-temperature liquids.
Up to 3 heads per drive · packaged skid systems available
Pressure testing
Also called: hydrotest pumps, pressure testing pumps, Well Test UFF-30.
Portable motorised pumps for hydrostatic pressure testing.
Used for: testing pressure vessels, castings, pipes, tubes and valves, and boiler feed.
Up to 120 kg/cm² (118 bar · 1,707 psi) · 150–560 l/h
Quick comparison
| Product | Choose it when you need… | Flow range | Max. pressure |
|---|---|---|---|
| Triplex plunger pump | High pressure, continuous flow | 0.6 – 1,907 l/min | 700 kg/cm² (686 bar · 9,956 psi) |
| Metering / dosing pump | An exact, adjustable chemical dose | 0.76 – 15,000 l/h | 700 kg/cm² (686 bar · 9,956 psi) plunger 385 kg/cm² (378 bar · 5,476 psi) diaphragm |
| Triplex metering pump | Several doses from one drive | Per head, as metering pumps | As metering pumps |
| Hydraulic test pump | Pressure-testing equipment | 150 – 560 l/h | 120 kg/cm² (118 bar · 1,707 psi) |
Pressures are maximum ratings for the smallest plunger sizes. Every pump is sized to your actual duty.
Pump selector
Enter your flow and pressure in your own units. We'll list the UDAY models that cover your duty.
Industries we serve
Chemical injection and dosing, ammonia scrubbing, corrosive and viscous liquids.
Reverse osmosis feed, dosing of treatment chemicals, process water disposal.
Boiler feed and boiler chemical dosing.
Salt water injection and chemical injection.
Cement grouting at high pressure.
Hydrostatic testing of pressure vessels, castings, tubes and valves.
Hydro-jetting, cutting and vehicle wash.
Detergent slurry transfer and mechanical separation.
Why choose BPPL
You deal directly with the company that designs, machines, assembles and tests your pump, and that will still supply its spares years later.
More than three decades of making reciprocating pumps in Ahmedabad, India.
Liquid ends in SS 304 / 316 / 316L, aluminium bronze, Alloy 20, Monel or Hastelloy.
Every pump is run and approved against your flow and pressure before it leaves our works.
Alloy-steel crank shafts, tapered roller bearings and pressure lubrication.
Coded spare parts and interchangeable components keep your downtime low.
Skid or trolley-mounted systems with tanks, dampeners, relief valves and instruments.
How to buy
Tell us the liquid, flow, pressure and temperature, by form, email or phone.
Our engineers select the model, plunger size and materials, and send you a quotation.
Your pump is built at our Ahmedabad works and fully tested against your duty before dispatch.
The pump ships with its operating manual, and coded spares are available for its working life.
For overseas buyers
Write to us in English. Our charts use kg/cm² and litres, and the selector above converts bar, psi, m³/h and US GPM for you.
1 kg/cm² = 0.98 bar = 14.2 psi · 1 m³/h = 1,000 l/h · 1 US GPM ≈ 227 l/h
About BPPL
Bhagyoday Pumps Pvt. Ltd. was incorporated on 10 June 1991 in Ahmedabad, Gujarat. We design and manufacture high-pressure, low-maintenance reciprocating pumps under the UDAY brand at our works in Naroda, Ahmedabad.
Every UDAY pump is made from carefully selected materials and goes through strict quality control. Liquid ends, materials and accessories are engineered to suit the liquid being handled.
FAQ
We manufacture reciprocating pumps under the UDAY brand: high-pressure triplex and quintuplex plunger pumps, metering (dosing) pumps and complete dosing systems, diaphragm pumps, fix-flow pumps and motorised hydraulic test pumps. We have been making them in Ahmedabad, India since 1991.
A positive-displacement pump with three plungers driven by a crank shaft. It delivers a steady, high pressure (up to 700 kg/cm² / 686 bar in our range), which suits injection, jetting, RO feed, boiler feed and hydrostatic testing.
A pump that delivers an exact, adjustable volume of liquid, typically a chemical added to a process. On UDAY metering pumps you can set the flow anywhere from 0 to 100% while the pump is running, with accuracy within ±1%.
For hydrostatic testing of vessels, pipes, castings and valves up to 120 kg/cm² (118 bar), choose the UFF-30 motorised hydraulic test pump. For higher test pressures, a triplex plunger pump is the right choice. Tell us your test pressure and volume.
Yes. Liquid ends are available in SS 304, SS 316, SS 316L and aluminium bronze as standard, and in Alloy 20, Monel or Hastelloy for special duties. Diaphragm heads are available for toxic or hazardous liquids.
Yes. Every UDAY part has a part code. Send us the pump model, or a photo of its name plate, and the part you need.
Liquid handled, flow rate, discharge pressure, suction conditions, operating temperature, material preference, and power supply (voltage and frequency). Our engineers will recommend the model and send a quotation.
1 kg/cm² = 0.98 bar = 14.2 psi. For example, 100 kg/cm² ≈ 98 bar ≈ 1,422 psi. For flow: 1 m³/h = 1,000 l/h, and 1 US GPM ≈ 227 l/h. You can enter bar, psi, m³/h or GPM directly in the pump selector.
Yes, we welcome enquiries from overseas buyers. Tell us your destination country, power supply and any inspection or documentation requirements, and we will reply with a technical offer.