Well Test UFF-30 series
Motorised hydraulic test pumps.
Also called: hydrotest pump, pressure testing pump, hydrostatic test pump.
Portable, easy-to-operate test pumps for accurate hydrostatic pressure, backed by BPPL's experience since 1991. A rugged, low-cost answer to everyday testing.
- Max. pressure
- 120 kg/cm² (118 bar · 1,707 psi)
- Flow
- 150 – 560 l/h (0.66 – 2.5 US GPM)
- Models
- UFF-30/25 and UFF-30/30
- Build
- Portable, oil-bath lubricated, trolley option
Applications
Test vessels, castings, tubes and valves.
- Hydrostatic pressure testing
- Boiler feed
- High-altitude pumping
- Circulating water under pressure
Totally enclosed
Protected drive for workshop and site use.
Easy to maintain
Simple, rugged standard design.
Oil-bath lubrication
Trouble-free operation, test after test.
Up to 120 kg/cm²
Higher pressure and flow available on request.
Performance chart
Power required at every pressure.
Brake horsepower (BHP) required at discharge pressure, by flow and speed.
| Model | LPH | RPM | 30 kg/cm² | 60 kg/cm² | 90 kg/cm² | 120 kg/cm² |
|---|---|---|---|---|---|---|
| UFF-30/25 | 150 | 200 | 0.310 | 0.620 | 0.935 | 1.240 |
| 225 | 300 | 0.400 | 0.800 | 1.200 | 1.600 | |
| 300 | 400 | 0.508 | 1.080 | 1.520 | 2.030 | |
| 375 | 500 | 0.605 | 1.210 | 1.810 | 2.420 | |
| UFF-30/30 | 252 | 200 | 0.380 | 0.760 | 1.140 | 1.520 |
| 330 | 300 | 0.480 | 0.960 | 1.440 | 1.920 | |
| 450 | 400 | 0.620 | 1.240 | 1.860 | 2.480 | |
| 560 | 500 | 0.750 | 1.500 | 2.250 | 3.000 |
Overall dimensions
Compact enough to move.
Pump head about 442 × 205 mm, with a 28 mm drive shaft and 50 × 8 × 4 keyway. Trolley mounting with swivelling caster wheels is available.
Dimensions in mm. Subject to change without notice.
Scope of supply
Ready to test, out of the crate.
Each pump is supplied with
- Common base plate
- Check valve
- Relief valve
- Pressure gauge
Optional accessories
- Suction tank
- Suction / discharge hose
- Skid
- Suction strainer
- Flanges
- Trolley with swivelling caster wheels
Get a price for your duty.
Share the liquid, flow, pressure and suction conditions. Our engineers will recommend the right model, plunger and materials.